As a manufacturer with more than ten years of Saw Blade production and sales experience, it needs to be determined based on the materials and materials to be cut, size, thickness, shape, cutting method, cutting requirements, etc. 
1 .The material of the cut aluminum material is not the same as the hardness and hardness of the aluminum material, and the paired alloy saw blade will also be different. If the texture of aluminum is too hard, the head of the alloy saw blade will need to be re-adjusted, because such materials cannot be hard-stiffened, otherwise it is very easy to damage the saw blade; if the aluminum material is soft, the blade of the alloy saw blade can be hardened Some, this can increase the durability of the saw blade.
2. The shape of the material to be cut Generally, the shape of the material to be cut of the enterprise is required to be fixed, and there will be special shapes in a few times. Therefore, slight adjustments must be made based on the data and results of the trial cut. 3. The thickness of the alloy saw blade and the number of teeth The cutting area and thickness of the cut aluminum alloy material determine the thickness of the alloy saw blade and the number of gears. If the material to be cut is relatively thin, then the saw blade must be thin and the number of gears is large, which can greatly reduce the occurrence of material bending and burrs; if the material to be cut is relatively thick, then the saw blade is To be thick and with a small number of gears, this can significantly reduce the yawing, sticking, and tooth decay. Therefore, it is necessary to select the correct blade thickness and number of gears based on the thickness of the material to be cut and the cutting requirements. 4 .cutting requirements and cutting methods The entire aluminum alloy cutting industry, most of the material cutting are required and cutting methods. For example, most aluminum alloy doors and windows require a 45-degree bevel; some people also require cutting without burrs, smooth cutting surfaces, and no chipping. This will need to choose the right alloy saw blade according to the actual situation 5 .Aluminum Alloy Saw Blade Size (Diameter) Size Selection The size of the aluminum alloy saw blade needs to be related to the machine equipment used and the thickness of the cutting material. Select the correct diameter blade depending on the size of the machine and material. 6 .Selection of Internal Control of Alloy Saw Blade The internal control of the saw blade is relatively simple. It is mainly based on the requirements of the equipment. However, in order to ensure the stability of the saw blade in the cutting process, the saw blade with a diameter of 455 mm or more is best. It is better to choose a larger one.
